Open a web browser and enter the IP address of the switch in the browser’s address field.ī. At the command prompt, enter enable.You are now in Privileged EXEC command mode.(There is no default password.)After a successful login, the screen shows the system prompt, for example (Extreme 220)>. Power on the switch.After the switch boots successfully, the User: login prompt displays.Configure the terminal-emulation program to use the following settings:.Using a straight-through modem cable, connect a VT100/ANSI terminal or a workstation to the console (serial) port.If you attached a PC, Apple, or UNIX workstation, start a terminal-emulation program, such as HyperTerminal or TeraTerm.If you are managing your 210 or 220 series switch with ExtremeCloud, point your browser to /quickstart to get started. ![]() Follow these steps to connect your 210 or 220 series switch to the network and perform first-time configuration.īefore you begin, make sure the switch is installed securely and connected to a power supply.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |